pH Up

$21.99
$21.99
pH Up - Raise pH in Aquariums The pH levels in your saltwater aquarium can heavily impact the health of your marine life. While the ideal pH level is not universal for all fish and corals, you do not want your aquarium to fall into a lower, acidic pH level....
Size
  • 250ml
  • 500ml
  • 1000ml

pH Up - Raise pH in Aquariums

The pH levels in your saltwater aquarium can heavily impact the health of your marine life. While the ideal pH level is not universal for all fish and corals, you do not want your aquarium to fall into a lower, acidic pH level.

A slightly alkaline environment (around 8.3) is a good level to aim for if you have a mixture of marine life. More often than not, hobbyists struggle to maintain a good level of alkalinity in their tank. This is where pH Up really comes into play; it helps to raise pH in aquariums, without promoting nuisance algae growth.

Fish and other aerobic organisms in your saltwater aquarium respire, producing carbon dioxide and absorbing oxygen. Dosing with pH Up will help to offset the carbon dioxide production by increasing and stabilizing pH within your aquarium.

Although pH Up is an effective method of treating pH temporarily, if you are chronically low, we do recommend getting to the source of your pH issues. Possible causes of low pH include too many fish, low amounts of fresh air being introduced to the aquarium, insufficient water flow and lack of alkalinity.

Contents:

– Deionized water

– Buffer salts 

Directions

  • Shaking is not required. However, if the product has been left standing for a length of time, invert the bottle 3-4 times before using.
  • When introducing pH Up to your aquarium, be sure to add the product to a high water flow. This product must be used in marine and reef aquariums, but cannot be used on a dosing pump.

Dosing

Always test your tank’s pH level prior to adding pH Up. Once you know the status of your current pH level, you can begin adding pH Up to gradually increase alkalinity to the desired level.

  • Add 6 mL per 100L/26G of aquarium water.
  • Wait 1-3 hours for pH to stabilize, re-test, and then (if required) add another dose based on the amount that pH increased from the initial 6 mL/100L dose. All aquariums differ, and individual results may vary.

When adjusting your tank’s pH levels, do not raise the pH more than 0.2 per day. Work to gradually increase alkalinity to avoid stress on your marine life. Additionally, we strongly recommend that you do not exceed a pH level higher than 8.5 in your aquarium.

Caution: Keep out of reach of children. May cause skin irritation. In case of contact with eyes, or swallowed seek medical advice immediately